DBP FlexTECH

Textile straight-warp belts from 400 N/mm in 1 ply to 2500 N/mm in 2 plies

DBP FlexTECH is a polyester straight-warp belt composed of one or two plies protected on both top and bottom sides by weft lines in polyamide.

Due to the thin carcass, DBP FlexTECH can be used with smaller pulley diameters than textile plied or steelcord belts. Straight-warp conveyor belts are used on heavy duty conveyors where resistance to the effects of heavy impacts and resistance to tearing are important characteristics, typically seen in quarrying, open cast mining and steel industries or in applications where heavy-duty and yet narrow belts arerequired, such as in tunnelling. The carcass frame thus
constructed is adhered RFL and may be coated of different types of rubber cover, anti-abrasive ( X , Y, etc.), oil-resistant (G, G+), heat-resistant (T150°, T200°), etc.
 

Specifications
Cover Abrasion < mm3 Elongation at break min. in % Min. ambient temperature in °C Constant material temperature in °C
 Max. temporary material temperature in °C
 Polymer basis
AA* 130 400 -30 80 90 SBR
Y 150 400 -30 80 100 SBR
X/H 120 450 -40 80 90 NR
W/D 90 400 -30 80 90 NR/SBR
T1 150 400 -20 150 170 SBR
T2 150 290 -20 220 400 EPDM
G 150 350 -20 80 90 SBR/NBR
G+ 140 350 -20 80 90 NBR
G1 170 450 -20 80 90 SBR/NBR
K/S 200 350 -20 80 90 SBR
V/VT 160 350 -20 80 90 CR

Category: DBP FlexTECH